Available under Creative Commons Attribution 4.0 International (CC BY 4.0)
Note: We will soon deprecate our XML Application Programming Interface and a new, comprehensive JSON API will be made available. Keep an eye on our website for further details.
On this page
- To make a pop gun one must get a piece of boartree six inches long and six inches of steel. Pare off the outside skin of the boartree. Make a hole through the piece of the boartree. Cut out about three inches half way through, leaving an inch and a half at each end. Fill up the hole at one end with a piece of stick. Put one end of the steel against the stick and bend the other end of the steel and put it against the other and of the boartree. Put a small stone in the hole that is not filled. Pull the steel and the stone will go. Patrick Commins
BoholaTranscribed by a member of our volunteer transcription project.